Coating for flooring

Wooden flooring places high demands on the surface. It requires chemical, mechanical and wear resistance. Our Polyx® Systems enable manufacturers to produce high quality surfaces. Regardless of whether factory-finished or pre-treated – our systems are tailored to your requirements and offer optimal solutions for solid wood plank andparquet flooring as well as cork and OSB floors.

Sapwood Stain

> Waterborne – physical curing
> Stains sapwood to match it to the rest of the wood
> For example, on Oak and Walnut
> Requires further treatment
> Solvent-free
> Only partial coating possible

Reactive Stain

> Waterborne – physical curing
> Grey or antique effects
> Transparent
> Requires further treatment
> Solvent-free
> Approx. 20-40 g/m²

Pigment Stain

> Waterborne – physical curing
> Intense colours; two-tone effects
> Transparent
> Requires further treatment
> Solvent-free
> Approx. 20-40 g/m²

Primer

> Waterborne – physical curing
> For a raw wood look
> Transparent
> Requires further treatment
> Solvent-free
> Approx. 20-80 g/m²

Oxi-Polyx^®-Oil

> Industrial hardwax-oil for oxidative curing
> Surface with a natural look and feel
> Transparent or clear, various sheens
> Pre-treated or factory-finished surfaces
> 1 or 2 coats in the same system or a system consisting of primer and Top Coat
> No hidden solvents (SVOCs)
> Approx. 15-40 g/m²

UV-Polyx^®-Oil

> Industrial hardwax-oil, curing with UV lamps
> High resistance with low application amounts
> Transparent or clear, various sheens
> Factory-finished surfaces
> One system consisting of primer and Top Coat
> 100% curing, no solvents
> Approx. 15-20 g/m²

Hybrid-Polyx^®-Oil

> Industrial hardwax-oil, curing with UV lamps
> Extremely matt natural surfaces
> Clear, various sheens
> Factory-finished surfaces
> Top Coat with Oxi-Polyx^®-Oil or UV-Polyx^®-Oil
> No hidden solvents (SVOCs)
> Approx. 15-20 g/m²

LED-Polyx^®-Oil

> Industrial hardwax-oil, curing with UV-LED lamps
> No heat development, no exhaust system needed
> Transparent or clear, various sheens
> Factory-finished surfaces
> One system consisting of primer and Top Coat
> 100% curing, no solvents
> Approx. 15-20 g/m²