Hartwachs-Öl Original
colours
Specifically geared towards the needs of wooden flooring!
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors, such as solid wood, plank, strip, OSB and cork flooring, as well as furniture surfaces.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0,375 | 10300161 | |
| 0,75 | 10300162 | ||
| 2,50 | 10300163 | ||
| 10,00 | 10300164 | ||
| 25,00 | 10300165 | ||
| 0,375 | 10300023 | |
| 0,75 | 10300001 | ||
| 2,50 | 10300002 | ||
| 10,00 | 10300003 | ||
| 25,00 | 10300004 | ||
| 0,375 | 10300043 | |
| 0,75 | 10300045 | ||
| 2,50 | 10300050 | ||
| 10,00 | 10300055 | ||
| 25,00 | 10300057 | ||
| 0,375 | 11100118 | |
| 0,75 | 11100119 | ||
| 2,50 | 11100120 | ||
| 10,00 | 11100121 | ||
| 25,00 | 11100109 |
NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Finished surface in 2 days, 2 coats
- First coat on the raw, sanded wood approx. 35 ml/m².
- Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
- Drying time approx. 8-10 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
- If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a scouring pad before applying the second coat.
- Second coat approx. 35 ml/m².
- Drying time approx. 8-10 hours; see point 3.
Note: Also available with Solas certification for the shipbuilding industry or as an anti-slip variant (R9/ R11)
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
WHAT WILL THE COATING LOOK LIKE?
Do you want to try our coatings out for yourself and see the results with your own eyes? Then order up to 5 sample sachets free of charge.
