Osmo Farbe

Hirnholz-Wachs

colours

Special end grain sealer – protects against cracks resulting from weathering!

Osmo Hirnholz-Wachs is especially suited for the end grains of decking, cladding or roof soffits made of hard and softwoods, such as Bangkirai, Teak, Massaranduba, Garapa, Cumaru as well as Pine, Spruce, Douglas Fir, Larch, Cedar, Thermowood etc.

Based on renewable raw materialsWater and dirt repellent surfaceReduces swelling and shrinkageRecoatable after approx. 4-6 hours5 m²/1 lProtects end grains against cracks and splitting
Free of water and silicones
Oil advantages – Simple application, Water beading effect, No flaking or peeling
COLOUR CODECAN SIZE LITREARTICLE NUMBER

5735 Farblos

seidenmatt

0,37510300151

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat Brush
  1. Apply first coat generously, wet on wet, on raw end grain approx. 150 ml/m².
  2. Drying time approx. 3-4 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  3. Second coat approx. 50 ml/m².
  4. Drying time approx. 3-4 hours; see point 2.
Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator

Farbmusterbestellung

WHAT WILL THE COATING LOOK LIKE?

Do you want to try our coatings out for yourself and see the results with your own eyes? Then order up to 5 sample sachets free of charge.

Order your sample sachets here

This could also interest you