2. Exterior Finishes
  3. Playgrounds & sandboxes
  4. Terrassen-Öle

Terrassen-Öl

Especially developed for the individual needs of numerous soft and fine woods!

Osmo Terrassen-Öl protects and maintains timber decking, garden furniture and privacy screens made of numerous coniferous and fine woods, such as pressure impregnated Pine, Douglas Fir, Cedar, Oak or Bangkirai – also suitable as a transparent colour treatment of Teak, Eucalyptus and other fine woods as well as thermally treated wood.

ADVANTAGES

  • Smoothen the wood surface and make it water and dirt-repellent
  • Easy to refresh, no sanding or primer necessary
  • Osmo Teak-Oil is clear and therefore it does not protect against UV radiation (greying).
  • Can sizes: 0.75 L; 2.50 L; 25 L
  • 1 litre covers approx. 24 m² with one coat.

Find dealers in your area

Osmo Holz und Color - Terrassen-Oel
Osmo Holz und Color - Terrassen-Oel
004 004 Douglasien-Öl naturgetönt (Douglas Fir) Osmo Douglasien-Öl naturgetönt 004
006 006 Bangkirai-Öl naturgetönt (Bangkirai) Osmo Bangkirai-Öl naturgetönt 006
007 007 Teak-Öl farblos (Teak) Osmo Teak-Öl farblos 007
009 009 Lärchen-Öl naturgetönt (Larch) Osmo Lärchen-Öl naturgetönt 009
010 010 Thermoholz-Öl naturgetönt (Thermowood) Osmo Thermoholz-Öl naturgetönt 010
013 013 Garapa-Öl naturgetönt (Garapa) Osmo Garapa-Öl naturgetönt 013
014 014 Massaranduba-Öl naturgetönt (Massaranduba) Osmo Massaranduba-Öl naturgetönt 014
016 016 Bangkirai-Öl dunkel (Bangkirai, dark) Osmo Bangkirai-Öl dunkel 016
019 019 Terrassen-Öl Grey Osmo Terrassen-Öl Grey 019
021 021 Terrassen-Öl Bog Oak Osmo Terrassen-Öl Bog Oak 021

TECHNICAL INFORMATION

Product information sheet PDF, 0.17 MB Safety datasheet (German) PDF, 0.08 MB Full declaration (German) PDF, 0.06 MB

Application

Finished surface in 2 days, 2 coats

  1. First coat thinly applied on raw (weathered) wood approx. 35 ml/m². Note: Resinous woods and hardwoods rich in extractives first need to weather off.
  2. Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
  3. Drying time approx. 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  4. Second coat approx. 35 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)
  5. Drying time approx. 12 hours; see point 3.
Finish Calculator

HOW MUCH COATING DO I NEED? 

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily. Please follow our advice in the product information sheets for the correct application. 

Go to the Finish Calculator

Hartwachs-Öl Original

WHAT DOES THE COATING LOOK LIKE? 

Do you want to try our coatings out for yourself and see the results with your own eyes? Then order up to 5 sample sachets free of charge. 

Order your sample sachets here.

Hartwachs-Öl Original

BRUSHES, ROLLERS, CLEANING BRUSHES AND BUFFING MACHINES

Osmo tools follow an ingenious system. Thanks to Quick Connect technology, you can combine our telescopic handle with various brushes, pads and other tools quickly and easily.

Find the right tools now!

Hartwachs-Öl Original

All videos and technical information can be found in our media library...

Go to the Media Library

Hartwachs-Öl Original

On the Platform Ausschreiben.de, we provide information specifically for architects about our company and our wood coatings that are available.

Link to Ausschreiben.de (German)

Osmo would like to provide you with the best service possible. In order to do this, we save information about your visit as so-called cookies. By using this website, you agree to the usage of cookies. Further information